Fabrication and evaluation of ribavirin-loaded electrospun nanofibers as an antimicrobial wound dressing.

Background: Skin is regarded as an essential first line of defense against harmful pathogens and it hosts an ecosystem of microorganisms that create a widely diverse skin microbiome. In chronic wounds, alterations in the host-microbe interactions occur forming polymicrobial biofilms that hinder the process of wound healing. Ribavirin, an antiviral drug, possesses antimicrobial activity, especially against Pseudomonas aeruginosa and Candida albicans, which are known as the main opportunistic pathogens in chronic wounds. Rationale: In this study, electrospun nanofiber systems loaded with ribavirin were developed as a potential wound dressing for topical application in chronic wounds. Ribavirin was chosen in this study owing to the emerging cases of antimicrobial (antibiotics and antifungal) resistance and the low attempts to discover new antimicrobial agents, which encouraged the repurposing use of current medication as an alternative solution in case of resistance to the available agents. Additionally, the unique mechanism of action of ribavirin, i.e., perturbing the bacterial virulence system without killing or stopping their growth and rendering the pathogens disarmed, might be a promising choice to prevent drug resistance. Cyclodextrin (CD) was utilized to formulate ribavirin as an electrospun nanofibers delivery system to enhance the absorption and accelerate the release of ribavirin for topical use. Results: The results demonstrated a successful ribavirin nanofibers fabrication that lacked beads and pores on the nanofibrous surfaces. Ribavirin underwent a physical transformation from crystalline to amorphous form, as confirmed by X-ray diffraction analysis. This change occurred due to the molecular dispersion after the electrospinning process. Additionally, the CD enhanced the encapsulation efficiency of ribavirin in the nanofibers as observed from the drug-loading results. Polyvinylpyrrolidone (PVP) and CD increased ribavirin released into the solution and the disintegration of fibrous mats which shrank and eventually dissolved into a gel-like substance as the ribavirin-loaded fibers began to break down from their border toward the midpoint. Cytotoxicity of ribavirin and CD was evaluated against human dermal fibroblasts (HFF-1) and the results showed a relatively safe profile of ribavirin upon 24-hour cell exposure, while CD was safe within 24- and 48-hour. Conclusion: This study provides valuable insights into the potential application of our nanofibrous system for treating chronic wounds; however, further antimicrobial and in-vivo studies are required to confirm its safety and effectiveness.

Development and evaluation of sildenafil/glycyrrhizin-loaded nanofibers as a potential novel buccal delivery system for erectile dysfunction.

Erectile dysfunction (ED) is a growing health condition that needs safe and effective therapy. One of the main common treatments is sildenafil which is used in clinics for managing erectile dysfunction by enhancing the blood supply to the penis. In the current study, sildenafil was formulated as nanofibers and mixed with the root extract of Glycyrrhiza glabra (glycyrrhizin) as a natural sweetener to be administrated in the buccal cavity for enhanced drug bioavailability, rapid drug absorption and improved patient compliance. The formulated dual-loaded nanofibers were evaluated by measuring diameter, disintegration, drug loading efficiency, drug release profile, and in vitro cell viability assessment. The results showed that the sildenafil/glycyrrhizin-loaded fibers had a diameter of 0.719 ± 0.177 µm and lacked any beads and pores formation on their surfaces. The drug loading and encapsulation efficiency for sildenafil were measured as 52 ± 7 µg/mg and 67 ± 9 %, respectively, while they were 290 ± 32 µg/mg and 94 ± 10 %, respectively, for glycyrrhizin. The release rate of sildenafil and glycyrrhizin demonstrated a burst release in the first minute, followed by a gradual increment until a complete release after 120 min. The in vitro cell viability evaluation exhibited that the application of sildenafil and glycyrrhizin is safe upon 24-hour treatment on human skin fibroblast cells at all used concentrations (i.e., ≤ 1,000 and 4,000 µg/mL, respectively). However, the application of sildenafil-glycyrrhizin combination (in a ratio of 1:4) demonstrated more than 80 % cell viability at concentrations of ≤ 250 and 1000 µg/mL, respectively, following 24-hour cell exposure. Therefore, sildenafil/glycyrrhizin dual-loaded PVP nanofibers showed a potential buccal therapeutic approach for erectile dysfunction management.

Critical attributes of fine excipient materials in carrier-based dry powder inhalation formulations: The particle shape and surface properties.

The potential of fine excipient materials to improve the aerodynamic performance of carrier-based dry powder inhalation (DPI) formulations is well acknowledged but not fully elucidated. To improve the understanding of this potential, we studied two fine excipient materials: micronized lactose particles and silica microspheres. Inhalation formulations, each composed of a coarse lactose carrier, one of the two fine excipient materials (0.0-15.0 % w/w), and a spray-dried drug (fluticasone propionate) material (1.5 % w/w) were prepared. The physical structure, the flow behavior, the aerosolization behavior, and the aerodynamic performance of the formulations were studied. The two fine excipient materials similarly occupied carrier surface macropores. However, only the micronized lactose particles formed agglomerates and appeared to increase the tensile strength of the formulations. At 2.5 % w/w, the two fine excipient materials similarly improved drug dispersibility, whereas at higher concentrations, the micronized lactose material was more beneficial than the silica microspheres. The findings suggest that fine excipient materials improve drug dispersibility from carrier-based DPI formulations at low concentrations by filling carrier surface macropores and at high concentrations by forming agglomerates and/or enforcing fluidization. The study emphasizes critical attributes of fine excipient materials in carrier-based DPI formulations.

Development of progesterone electrospun nanofibers to coat Arabin pessaries as a dual preventive and therapeutic approach for preterm labor.

Preterm labor is a growing health problem that causes newborn death, and safe and effective therapy is significantly needed. Arabin pessaries and progesterone are preventive and therapeutic approaches that can be applied to managing the short cervix; hence, reducing the risk of preterm labor. The main goal of current work is to fabricate a novel nanofiber formulation based on polycaprolactone (PCL) and loaded with progesterone to coat for Arabin pessaries to be used as dual preventive and therapeutic approaches for local vaginal delivery. Several important criteria were considered in this study to assess the prepared nanofibers (i.e.; nanofiber diameter, progesterone loading efficiency, progesterone release profiles and in vitro cytotoxicity assessment). The results showed a dimeter of 397 ± 88 nm, drug loading of 142 ± 3 µg/mg and encapsulation efficiency of 99 ± 2 % for the progesterone-loaded nanofibers. Approximately, 17 % of progesterone was released from the nanofibers after 90 days. The in vitro assessment showed that the application of progesterone is safe upon 24 and 48-hours incubation on HFF-1 cell line at concentrations ≤ 32 µg/mL and within 72-hours at a dose of ≤ 8 µg/mL. To conclude, the data recommended that progesterone-loaded nanofibers can coat the Arabin pessaries with the potential of being a safe and effective dual preventive and therapeutic tool for preterm labor.

Eflornithine Hydrochloride-Loaded Electrospun Nanofibers as a Potential Face Mask for Hirsutism Application.

Hirsutism is a distressing condition that can affect women's self-esteem due to the excessive amount of hair growth in different body parts, including the face. A temporary managing option is to develop a self-care routine to remove unwanted hair through shaving or waxing. Laser or electrolysis are alternative methods, but in some cases, the use of medications, such as the topical cream Vaniqa®, can help in reducing the growth of unwanted hair. Electrospun fibers have been used in several drug delivery applications, including skin care products, owing to their biocompatibility, biodegradability, high surface area-to-volume ratio, and dry nature that can release the encapsulated drugs with maximum skin penetration. Therefore, polyvinyl pyrrolidone (PVP) fibers were fabricated in combination with hyaluronic acid to deliver the active compound of Vaniqa®, i.e., Eflornithine hydrochloride (EFH), as a face mask to inhibit excess facial hair growth. The prepared drug-loaded fibers showed a diameter of 490 ± 140 nm, with an encapsulation efficiency of 88 ± 7% and a drug loading capacity of 92 ± 7 µg/mg. The in vitro drug release of EFH-loaded fibers exhibited an initial burst release of 80% in the first 5 min, followed by a complete release after 360 min, owing to the rapid disintegration of the fibrous mat (2 s). The in vitro cytotoxicity indicated a high safety profile of EFH at all tested concentrations (500-15.625 µg/mL) after 24-h exposure to human dermal fibroblast (HFF-1) cells. Therefore, this drug-loaded nanofibrous system can be considered a potentially medicated face mask for the management of hirsutism, along with the moisturizing effect that it possesses. Topical applications of the developed system showed reduced hair growth in mice to a certain extent.

Development of Imeglimin Electrospun Nanofibers as a Potential Buccal Antidiabetic Therapeutic Approach.

The prevalence of type 2 diabetes (T2D) has been growing worldwide; hence, safe and effective antidiabetics are critically warranted. Recently, imeglimin, a novel tetrahydrotriazene compound, has been approved for use in T2D patients in Japan. It has shown promising glucose-lowering properties by improving pancreatic beta-cell function and peripheral insulin sensitivity. Nevertheless, it has several drawbacks, including suboptimal oral absorption and gastrointestinal (GI) discomfort. Therefore, this study aimed to fabricate a novel formulation of imeglimin loaded into electrospun nanofibers to be delivered through the buccal cavity to overcome the current GI-related adverse events and to provide a convenient route of administration. The fabricated nanofibers were characterized for diameter, drug-loading (DL), disintegration, and drug release profiles. The data demonstrated that the imeglimin nanofibers had a diameter of 361 ± 54 nm and DL of 23.5 ± 0.2 µg/mg of fibers. The X-ray diffraction (XRD) data confirmed the solid dispersion of imeglimin, favoring drug solubility, and release with improved bioavailability. The rate of drug-loaded nanofibers disintegration was recorded at 2 ± 1 s, indicating the rapid disintegration ability of this dosage form and its suitability for buccal delivery, with a complete drug release after 30 min. The findings of this study suggest that the developed imeglimin nanofibers have the potential to be given via the buccal route, thereby achieving optimal therapeutic outcomes and improving patient compliance.

Taste Masking of Promethazine Hydrochloride Using l-Arginine Polyamide-Based Nanocapsules.

Promethazine hydrochloride (PMZ), a potent H1-histamine blocker widely used to prevent motion sickness, dizziness, nausea, and vomiting, has a bitter taste. In the present study, taste masked PMZ nanocapsules (NCs) were prepared using an interfacial polycondensation technique. A one-step approach was used to expedite the synthesis of NCs made from a biocompatible and biodegradable polyamide based on l-arginine. The produced NCs had an average particle size of 193.63 ± 39.1 nm and a zeta potential of −31.7 ± 1.25 mV, indicating their stability. The NCs were characterized using differential scanning calorimetric analysis and X-ray diffraction, as well as transmission electron microscopy that demonstrated the formation of the NCs and the incorporation of PMZ within the polymer. The in vitro release study of the PMZ-loaded NCs displayed a 0.91 ± 0.02% release of PMZ after 10 min using artificial saliva as the dissolution media, indicating excellent taste masked particles. The in vivo study using mice revealed that the amount of fluid consumed by the PMZ-NCs group was significantly higher than that consumed by the free PMZ group (p < 0.05). This study confirmed that NCs using polyamides based on l-arginine and interfacial polycondensation can serve as a good platform for the effective taste masking of bitter actives.

Development of a Curcumin-Loaded Lecithin/Chitosan Nanoparticle Utilizing a Box-Behnken Design of Experiment: Formulation Design and Influence of Process Parameters.

Curcumin (CUR) has impressive pharmacologic properties, including cardioprotective, neuroprotective, antimicrobial, and anticancer activity. However, the pharmaceutical application of CUR is limited due to its poor aqueous solubility and low bioavailability. The development of novel formulations has attracted considerable attention to the idea of applying nanobiotechnology to improve the therapeutic efficacy of these challenging compounds. In this study, CUR-loaded lecithin−chitosan nanoparticles (CUR/LCSNPs) were developed and optimized by the concentration of chitosan, lecithin, and stirring speed by a 3-factorial Box-Behnken statistical design, resulting in an optimal concentration of chitosan (A) and lecithin (B) with a 1200 rpm stirring speed (C), with applied constraints of minimal average particle size (Y1), optimal zeta potential (Y2), and maximum entrapment efficiency (%EE) (Y3). The mean particle size of the checkpoint formulation ranged from 136.44 ± 1.74 nm to 267.94 ± 3.72, with a zeta potential of 18.5 ± 1.39 mV to 36.8 ± 3.24 mV and %EE of 69.84 ± 1.51% to 78.50 ± 2.11%. The mean particle size, zeta potential, %EE, and % cumulative drug release from the optimized formulation were 138.43 ± 2.09 nm, +18.98 ± 0.72 mV, 77.39 ± 1.70%, and 86.18 ± 1.5%, respectively. In vitro drug release followed the Korsmeyer−Peppas model with Fickian diffusion (n < 0.45). The optimized technique has proven successful, resulting in a nanoformulation that can be used for the high loading and controlled release of lipophilic drugs.

Do Self-adhesive Resin Composites Release More Monomers? A Comparative High-performance Liquid Chromatographic Analysis.

PURPOSE: To comparatively evaluate the elution of residual monomers (bis-GMA, bis-EMA, TEG-DMA, and HEMA) from two self-adhesive flowable resin composites, a giomer, and a nano-flowable resin composite over five different time intervals, using high-performance liquid chromatography (HPLC). MATERIALS AND METHODS: Four flowable resin composites were investigated (Vertise Flow, Constic, Beautifil Flow Plus F03, and Filtek Z350 XT). Immediately after polymerization, each sample was immersed in 75% ethanol/water solution and stored in amber-colored bottles at room temperature. HPLC analysis was performed at predefined time intervals: 1 h, 24 h, 4 days, 8 days and 16 days. The extraction solution was changed after each analysis. Data were analyzed with repeated-measures ANOVA and one-way ANOVA with Tukey's post-hoc test at p < 0.05. RESULTS: The highest mean concentration of residual monomers was eluted from Beautifil, followed by Filtek, and both were significantly higher (p < 0.05) than the mean concentration of eluates from self-adhesive resin composites (Vertise Flow and Constic). Vertise Flow released significantly higher concentrations of HEMA than all the other tested materials. At 1 h post-immersion, 52.2% of monomers were eluted, and continued to elute at a reduced rate throughout the study duration. TEG-DMA was the fastest monomer to leach out, while bis-GMA exhibited significantly higher total mean concentration. The elution rate was significantly dependent on the molecular weight of the eluted monomers. CONCLUSION: No specific elution behavior can be attributed to self-adhesive RBCs. Elution of residual monomers is dependent on each material's composition, resin matrix characteristics, and the monomer's molecular weight.

Novel Thymoquinone Nanoparticles Using Poly(ester amide) Based on L-Arginine-Targeting Pulmonary Drug Delivery.

Thymoquinone (TQ), the main active constituent of Nigella sativa, has demonstrated broad-spectrum antimicrobial, antioxidant, and anti-inflammatory effects, which suggest its potential use in secondary infections caused by COVID-19. However, clinical deployment has been hindered due to its limited aqueous solubility and poor bioavailability. Therefore, a targeted delivery system to the lungs using nanotechnology is needed to overcome limitations encountered with TQ. In this project, a novel TQ-loaded poly(ester amide) based on L-arginine nanoparticles was prepared using the interfacial polycondensation method for a dry powder inhaler targeting delivery of TQ to the lungs. The nanoparticles were characterized by FTIR and NMR to confirm the structure. Transmission electron microscopy and Zetasizer results confirmed the particle diameter of 52 nm. The high-dose formulation showed the entrapment efficiency and loading capacity values of TQ to be 99.77% and 35.56%, respectively. An XRD study proved that TQ did not change its crystallinity, which was further confirmed by the DSC study. Optimized nanoparticles were evaluated for their in vitro aerodynamic performance, which demonstrated an effective delivery of 22.7-23.7% of the nominal dose into the lower parts of the lungs. The high drug-targeting potential and efficiency demonstrates the significant role of the TQ nanoparticles for potential application in COVID-19 and other respiratory conditions.

Fast-Dissolving Nifedipine and Atorvastatin Calcium Electrospun Nanofibers as a Potential Buccal Delivery System.

Geriatric patients are more likely to suffer from multiple chronic diseases that require using several drugs, which are commonly ingested. However, to enhance geriatric patients' convenience, the electrospun nanofiber system was previously proven to be a successful alternative for the existing oral dosage forms, i.e., tablets and capsules. These nanofibers prepared either as single- or multi-layered fibers could hold at least one active compound in each layer. They might also be fabricated as ultra-disintegrated fibrous films for oral cavity administration, i.e., buccal or sublingual, to improve the bioavailability and intake of the administered drugs. Therefore, in this work, a combination of nifedipine and atorvastatin calcium, which are frequently prescribed for hypertension and hyperlipidemia patients, respectively, was prepared in a coaxial electrospinning system for buccal administration. Scanning electron microscopy image showed the successful preparation of smooth, non-beaded, and non-porous surfaces of the drug-loaded nanofibers with an average fiber diameter of 968 ± 198 nm. In contrast, transmission electron microscopy distinguished the inner and outer layers of those nanofibers. The disintegration of the drug-loaded nanofibers was ≤12 s, allowing the rapid release of nifedipine and atorvastatin calcium to 61% and 47%, respectively, after 10 min, while a complete drug release was achieved after 120 min. In vitro, a drug permeation study using Franz diffusion showed that the permeation of both drugs from the core-shell nanofibers was enhanced significantly (p < 0.05) compared to the drugs in a solution form. In conclusion, the development of drug-loaded nanofibers containing nifedipine and atorvastatin calcium can be a potential buccal delivery system.

α1-Acid Glycoprotein-Decorated Hyaluronic Acid Nanoparticles for Suppressing Metastasis and Overcoming Drug Resistance Breast Cancer.

Robust inflammation-suppressing nanoparticles based on α1-acid glycoprotein (AGP)-conjugated hyaluronic acid nanoparticles (AGP-HA NPs) were designed to regulate breast cancer cells' sensitivity to chemotherapy and to suppress tumor metastasis. The successful conjugation between AGP and HA NPs was confirmed using FTIR, zeta potential, and UV-vis spectroscopy. In vitro studies on MCF-7 cells indicated the remarkable ability of AGP-HA NPs in suppressing migratory tumor ability by 79% after 24 h. Moreover, the efficacy study showed the high capability of AGP-HA NPs in modulating MDA-MB-231 cells and restoring cell sensitivity to the chemotherapeutic drug doxorubicin (DOX). Furthermore, the finding obtained by flow cytometry and confocal spectroscopy demonstrated that AGP-HA NPs enhanced DOX uptake/retention and aided it to reach cell nucleus within 4 h of incubation. Therefore, AGP-HA NPs represent a viable and effective treatment option to strengthen the anticancer effects of chemotherapeutic agents and potentially improve patients' survival rates.

Preparation and evaluation of benzalkonium chloride hand sanitizer as a potential alternative for alcohol-based hand gels.

Hand hygiene is one of the effective measures for reducing the transmission of infections. Alcohol-based hand sanitizers containing ethanol or isopropanol are considered efficient alternatives to handwashing with water and soap. Despite being effective against a broad-spectrum of microbes, fining an effective alternative to the alcohol-based hand sanitizers became a necessity owning to the limitations associated with their use, such as skin dryness, irritant contact dermatitis, and intoxication upon their accidental ingestion. Furthermore, in certain circumstances when the demand for alcohol exceeds the supply, like in the current COVID19 pandemic, formulating an effective non-alcoholic hand sanitizer would be a potential solution. Therefore, in this study, a non-alcoholic hand sanitizer containing benzalkonium chloride (BKC) as an active ingredient was prepared and evaluated as a less irritant and more persistent hand sanitizer gel. The hand gel was characterized by pH, viscosity, and spreadability. Results showed that this product has low viscosity, high spreadability and pH of 6.3, which is less likely to cause skin irritation. The antibacterial assessment (zone of inhibition) of the BKC-based hand sanitizer demonstrated antibacterial activities against nine out of eleven gram-positive and gram-negative bacterial strains, while the acceptability study on ten participants showed no signs of skin irritation nor redness upon its application. Consequently, this non-alcoholic based hand sanitizer is suggested as a potential alternative to alcohol-based hand gels.

Fabrication and Characterization of Fast-Dissolving Films Containing Escitalopram/Quetiapine for the Treatment of Major Depressive Disorder.

Major depressive disorder (MMD) is a leading cause of disability worldwide. Approximately one-third of patients with MDD fail to achieve response or remission leading to treatment-resistant depression (TRD). One of the psychopharmacological strategies to overcome TRD is using a combination of an antipsychotic as an augmenting agent with selective serotonin reuptake inhibitors (SSRIs). Among which, an atypical antipsychotic, quetiapine (QUE), and an SSRI, escitalopram (ESC), were formulated as a fixed-dose combination as a fast-dissolving film by coaxial electrospinning. The resultant fiber's morphology was studied. SEM images showed that the drug-loaded fibers were smooth, un-beaded, and non-porous with a fiber diameter of 0.9 ± 0.1 µm, while the TEM images illustrated the distinctive layers of the core and shell, confirming the successful preparation of these fibers. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies confirmed that both drugs were amorphously distributed within the drug-loaded fibers. The drug-loaded fibers exhibited a disintegration time of 2 s, which accelerated the release of both drugs (50% after 5 min) making it an attractive formulation for oral mucosal delivery. The ex vivo permeability study demonstrated that QUE was permeated through the buccal membrane, but not ESC that might be hindered by the buccal epithelium and the intercellular lipids. Overall, the developed coaxial fibers could be a potential buccal dosage form that could be attributed to higher acceptability and adherence among vulnerable patients, particularly mentally ill patients.

Inhalable, Spray-Dried Terbinafine Microparticles for Management of Pulmonary Fungal Infections: Optimization of the Excipient Composition and Selection of an Inhalation Device.

Terbinafine is a broad-spectrum antifungal agent with therapeutic potential against pulmonary aspergillosis. The main aim of the current study was to investigate the potential of l-leucine, alone and in combination with mannitol, to improve the performance of spray-dried terbinafine microparticles for inhalation. The study also aimed to investigate the potential of the low resistance Cyclohaler® and the high resistance Handihaler® as inhalation devices for spray-dried microparticles. To this end, eight powder inhalation formulations of terbinafine were prepared by nano spray drying via a factorial experimental design. The formulations were evaluated in vitro for their potential to deliver the antifungal drug to the lungs using the Cyclohaler® and the Handihaler®. Leucine was superior as an excipient to mannitol and to mixtures of leucine and mannitol. Using leucine as an excipient resulted in formulations with fine particle fractions of up to 60.84 ± 0.67% w/w and particle mass median aerodynamic diameters of down to 1.90 ± 0.20 µm, whereas using mannitol as an excipient resulted in formulations with fine particle fractions of up to 18.75 ± 3.46% w/w and particle mass median aerodynamic diameters of down to 6.79 ± 0.82 µm. When leucine was used as an excipient, using 50% w/w rather than 25% w/w ethanol in water as a spray solvent enhanced the dispersibility of the particles, with a mean absolute increase in the formulation fine particle fraction of 9.57% w/w (95% confidence interval = 6.40-12.73% w/w). This was potentially underlain by enrichment of the particle surfaces with leucine. The Cyclohaler® outperformed the Handihaler® as an inhalation device for the developed formulations, with a mean absolute increase in the fine particle fraction of 9.17% w/w (95% confidence interval = 8.17-10.16% w/w).

Theophylline colon specific tablets for chronotherapeutic treatment of nocturnal asthma.

The ultimate goal is to design a new chronotherapeutic system for theophylline (TPH) with high potential benefits in treating nocturnal asthma. TPH core tablets were prepared by wet granulation using a developed formula. Compression coating over core tablets containing 200 mg TPH was done using granulated chitosan with 10% PVP K30. Different formulae F1, F2 and F3 were prepared using coat weights 260, 300 and 360 mg, respectively. The in vitro release characteristics in both variant pH media mimicking the gastrointestinal media and in media containing rat cecal content were monitored. The in vivo performance of the optimum formula was compared with Avolen(®) SR in Beagle dogs. F3 with high coat thickness exhibited a minimal release after 5-h release study. Both F2 and F3 showed more than 50% drug release after 4 h in the rat cecal medium. This reflects the colon selectivity of the system. The C(max) values were found to be 5.49 ± 0.46 and 5.12 ± 0.85 µg/mL for F3 and Avolen(®) SR, respectively, F3 showed higher mean plasma concentration than Avolen(®) SR from the beginning and continued till 7 h post administration indicating high potential as chronotherapeutic treatment of nocturnal asthma.